Home | Performance Road Products | Aldon Products | Engine Management | Weber Products | Silicon Hoses

Bailey Motorsport                       Aldon Automotive

Bailey Motorsport ‘Header Tanks’

All Bailey header tanks are designed as direct replacements for the original requiring no special hoses or tools to enable fitment. Where required all header tanks come supplied with threaded CNC machined bosses to allow re-fitment of O.E. water level sensors and come supplied with a quality high pressure cap.

Every Bailey header tank is pressure tested to over twice its normal operating range, so you are assured of reliability, even with increased coolant temperatures from high BHP cars.

All Bailey header tanks are lightweight but very strong and are highly polished to a mirror-like finish. The special 1.3 Bar (19psi) cap design raises the pressure within your cooling system which effectively raises the boiling point of the water, keeping your car cooler for longer.

Why choose a Bailey Header Tank?

• Press formed lids are much stronger than butt welded types.
• No nasty square edges, only smmoth forms and curves are used.
• Superior quality, high pressure screw cap with built in release valve.
• Properly swaged push-on connectors
• Made from lightweight alloy, which dissipates heat faster than heavy stainless steel tanks
• Race quality design & testing procedure.

Bailey Motorsport ‘Oil Separators’

Car manufacturers spend thousands of pounds developing efficient breather systems for their cars, which usually work perfectly well for a standard model, but once the engine RPM or power output is raised the standard system is no longer ‘god enough’. Bailey Motorsport breather systems actually separate the oil into vapour and liquid, which gives three major benefits.

1. Reduced Crankcase Pressure – Meaning you engine will perform better for longer.
2. Oil Re-Circulation – As oil separators are designed to return the oil back to the engine sump, your oil will last longer .
3. Mix Air and Fuel, Not Oil .

Bailey Motorsport ‘ Swirl Pots’

Water swirl pots are fitted as common practice on many race cars, where the demands on the cooling system are high due to increased power and engine revs. Swirl pots fit into the radiator top hose and their function is the swirl the incoming water, which due to centrifugal force removes the air bubbles through the top spout, which is then fed back to the header tank. Removing the air causing by localised boiling within the cooling system will allow the water to have a more stable operating temperature.

Once the air is removed your radiator will work more efficiently as air takes up valuable space without conducting any heat away.

Swirl Pots are an ideal partner for the range of header tanks, all swirl pots are manufactured from the best quality aluminium and highly polished.

Power Steering tanks, windscreen washer and chargecooler tanks are also available for a selection of cars.

Bailey Motorsport
Bailey Motorsport ‘Header Tanks’
Bailey Motorsport ‘Oil Separators’
Bailey Motorsport ‘ Swirl Pots’

	Bailey Motorsport Aldon stock a wide range of Bailey Motorsport: Click here to buy Bailey Motorsport Header Tanks Click here to buy Bailey Motorsport Oil Separators Click here to buy Bailey Motorsport Swirl Pots